-------------------------

The Rust Coating Process

-------------------------

Before Rust Coating


The inner wheel wells are carefully accessed so as to allow for an even coat of rust preventative.

---------------------------

After Undercoating

World Class Rust Proofing

-------------------------

The Rust Coating Process Begins


Our rustproofing has the ability to creep into cavities and flow upward, sideways and downward into welds and seams.



We use our high pressure equipment to get into areas that others are not able to reach.

-------------------------

Rust coating is shown being applied inside the doors.

Rust Coaters LLC

BY APPOINTMENT: 3005 Melby Street #4 - Eau Claire, WI 54703

-------------------------

Before Rust Coating


​The under-body is 'steam cleaned' with high-pressure hot water.

-------------------------

BEFORE: Right rear wheel well

-------------------------

Before and After


Here are some BEFORE & AFTER Close ups that show what the rust coating looks like underneath the vehicle.

-------------------------

Rust coating is shown being applied to the spare tire.

-------------------------

Rust coating is shown being applied inside the front hood.

-------------------------

Rust coating is shown being applied to the rear axle.

-------------------------

AFTER: Left inner rocker and floor area

-------------------------

AFTER: Tail light compartment

------------------------

After Undercoating

-------------------------

AFTER: Rear axle

------------------------------

-------------------------


All the parts that were removed to allow for proper access are now reinstalled



-------------------------

Finally, the outside of the vehicle is washed to remove any rust coating overspray from the outside body.

-------------------------

Before Rust Coating


Any pockets of water are blasted out with compressed air and large fans are setup to aid the drying process.

-------------------------

Before Rust Coating


Any accessible areas that have loose crusty rust are gone over with a rust descaler to remove it.

-------------------------

Happy Customers - who now have a vehicle that will last them a long time!

-------------------------

Rust coating is shown being applied inside the tail gate.

-------------------------

The rear box side inner wheel wells also injected with rust coating.

Thanks Rod and Marrietta!





--------------------------

Before Undercoating

-------------------------

After Undercoating


-------------------------

AFTER: Rear bumper, brackets and trailer hitch

-------------------------

AFTER: Front axle left spindle

-------------------------

BEFORE: Front axle

-------------------------

Afterward the access holes are capped-off with factory looking plastic covers.

-------------------------

After Undercoating


------------------------

Before Undercoating

-------------------------

BEFORE: Right front wheel well area

Owner: Rod Schug

​Emerald, WI

2001 Dodge Ram 2500 4 x4

Miles: 083,642

------------------------

After Undercoating

-------------------------

Before Undercoating

-------------------------

AFTER: Rear bumper, brackets and trailer hitch

-------------------------

AFTER: ​Right front wheel well area

-------------------------

Rust coating is shown being applied inside the box sides.

-------------------------

Before Rust Coating


​A masking spray is applied over the outer surfaces of the vehicle to keep the undercoating and rustproofing materials from sticking to the glass, trim and paint finish.

-------------------------

AFTER: Right rear wheel well

-------------------------

Before Undercoating

-------------------------

AFTER: Rear floor of pickup bed

CALL 9am - 9pm -7 days a week​
Phone:  715-590-4832​

-------------------------

BEFORE: Rear floor of pickup bed

-------------------------

AFTER: Front axle

-------------------------

BEFORE: Rear axle

-------------------------

BEFORE: Front axle left spindle

-------------------------

Before Rust Coating


​A degreaser - salt neutralizer is applied.

-----------------------

Before Undercoating

-------------------------

BEFORE: Left inner rocker and floor area

-------------------------

Rust coating is shown being applied to the inside the rocker panels.

............................................

............................................

Before Rust Coating


The tires, wheel well liners, under-body shields, tail lights are removed for better access to the undercarriage.

DODGE TRUCK

'Auto Undercoating' & 'Auto Rustproofing'

Review